2.6 Engine kit (5 ring piston, 95mm)

Need it delivering elsewhere? Click here

---

BMC 2.6 engine kit with 95mm pistons.

This engine overhaul kit is built to suit your individual engine application. There is not one engine kit that fits every BMC 3-cylinder engine, so we will need either your engine serial number or the engine liner size before supplying the correct parts.

Important ordering note:

Please call or email us with your engine serial number before ordering, so we can identify and build the correct engine kit for your application.

The serial number of the BMC 3-cylinder engine is stamped on a machined face on the forward lower right-hand side of the cylinder block, beneath the fuel injection pump coupling. You can read our blog about where to find the serial numbers. 

You are looking for a serial number that is of similar format to OEC/1234/1234, 25T/1234/12345 or 25TA/A/1234.

Engine kit contains:

• 3 x piston and pin, 5-ring type
• 3 x piston ring set
• 3 x engine liner
• 3 x liner seal set
• 3 x small end bush (the small end bushes will need reaming after fitting)
• 1 x head gasket set, including valve stem seals
• 1 x bottom set
• 1 x front crank seal
• 6 x tab washer
• 3 x liner shim